Previous Article | Next Article ![]()
Eukaryotic Cell, October 2005, p. 1712-1724, Vol. 4, No. 10
1535-9778/05/$08.00+0 doi:10.1128/EC.4.10.1712-1724.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
and
Jürgen Wendland1,2*
Junior Research Group: Growth Control of Fungal Pathogens, Leibniz Institute for Natural Products Research and Infection Biology, Hans-Knöll Institute,1 Department of Microbiology, Friedrich-Schiller University, Jena, Germany2
Received 19 May 2005/ Accepted 25 July 2005
|
|
|---|
|
|
|---|
The actin cytoskeleton is involved in three basic structures: actin patches, actin cables, and the cytokinetic ring at sites of cell cleavage in animal and fungal cells. Actin patches are found at sites of endocytosis, actin cables provide tracks for vesicle delivery, and dynamic constriction of the actin ring is required for cytokinesis (32).
Rho-type GTPases, such as Cdc42, are known regulators of the actin cytoskeleton in that they activate downstream effector proteins (11). Two major classes of conserved effector protein families are the Wiskott-Aldrich syndrome proteins (WASPs) and the formins. WASP-like proteins are involved in endocytosis and play a role in Arp2/3-dependent actin assembly (7, 26, 43). The C. albicans WASP homolog, Wal1, was shown to be required for endocytosis and vacuolar morphology as well as polarized hyphal growth (40). Formins represent the conserved family of Diaphanous-related proteins that control the assembly of actin cables (33, 34). Formins assemble linear actin cables in an Arp2/3 complex-independent manner (12, 13, 33, 34).
The sole Aspergillus nidulans formin, SEPA, is so far the only formin analyzed in filamentous fungi. SEPA localizes to sites of polarized growth both at the hyphal tip and at septal sites. The tip localization resembles the position of a structure termed the Spitzenkörper (17). In Saccharomyces cerevisiae the formin Bni1 colocalizes with Spa2, Bud6, and Pea2 at sites of polarized growth and forms a complex termed the polarisome (15, 36). In C. albicans, SPA2 has been analyzed recently and was found to localize to the tips of growing hyphae. Consistently, deletion of SPA2 resulted in polarity and hyphal growth defects (44).
In this study, we exploit the human fungal pathogen Candida albicans as a model to understand the role and contribution of formins in the regulation of polarized morphogenesis. In C. albicans, the yeast-to-hyphal transition contributes to its virulence and allows the penetration of epithelia and the evasion of the host cellular immune response (6). The genetic basis of morphogenetic switching in C. albicans relies on the activation of the Ras1-GTPase by extracellular signals which induce two downstream signal cascades: a mitogen-activated protein (MAP) kinase pathway and the cyclic AMP (cAMP) pathway. Both activate transcriptional regulators, Cph1 and Efg1, respectively, that induce hypha-specific gene expression (4). Deletions of CPH1 and EFG1 or a single deletion of both RAS1 alleles yields viable mutant strains that are nonfilamentous under most conditions and avirulent in animal models (14, 25). On the other hand, constitutive activation of RAS1, using a ras1G13V allele, enhances filamentous growth (15). In this study, we investigate the role of the C. albicans formins as part of a potential Spitzenkörper complex and present a model including the actin cytoskeleton machinery in the regulatory network that establishes hyphal morphogenesis in C. albicans.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Strains used in this study
|
In order to fuse BNI1 with green fluorescent protein (GFP), a fusion cassette was cloned. To this end, a PCR fragment was amplified from genomic DNA which contains the 3' end of BNI1. The in vivo recombination machinery of Saccharomyces cerevisiae was used to fuse the end of the BNI1 ORF with GFP. To this end, a GFP-URA3 PCR cassette was amplified from the standard set of modules. This cassette contains C. albicans URA3, which is also functional in S. cerevisiae. Gene targeting in S. cerevisiae requires shorter homology regions that flank the target locus (45 bp were used in our case). This detour via S. cerevisiae was used to generate a cassette and to verify the correct in-frame fusion after plasmid recovery from yeast and amplification in Escherichia coli by sequencing. This cassette was excised from the plasmid backbone and used for the transformation of BWP17, yielding strain GC59.
The constitutively active ras1G13V allele was used as described previously, which resulted in targeted integration of the CaMAL2 promoter-driven alleles at the C. albicans ADE2 locus (14).
Primers used for the construction of cassettes and the verification of deletions are listed in Table 2 or were described previously (40). Disruptions were verified by PCR of whole yeast cells.
|
View this table: [in a new window] |
TABLE 2. Oligonucleotide primers used in this study
|
Staining procedures. Chitin staining was done by directly adding 1 µl calcofluor (1 mg/ml) to a 100-µl cell suspension, followed by an incubation of 15 min at room temperature and a subsequent washing step to optimize the signal-to-noise ratio. Vacuolar staining of overnight cultures was done using the lipophilic dye FM4-64 (0.2 µg/ml). Cells were stained for 30 min at 30°C prior to photography. To monitor the uptake of FM4-64 by in vivo time-lapse microscopy, cells in the exponential growth phase were transferred to deep-well microscopy slides containing the dye in the culture medium. Imaging of the Spitzenkörper-like structure was done by staining cells induced for germ tube formation with FM4-64 immediately prior to microscopy. Staining of vacuoles in germ tubes was done by adding FM4-64 to the culture during hyphal induction, which was carried out for 3 h at 37°C in the dark in minimal medium containing 10% serum. Rhodamine-phalloidin staining of the actin cytoskeleton was done as described previously (29).
Time-lapse microscopy. Strains were grown to exponential phase, harvested, washed, and resuspended in sterile water. Small aliquots of cells (1.5 µl) were applied to microscopy slides with deep wells as described previously (38). Temperature control was achieved via a heat stage mounted on the microscope table. Microscopy was performed on an automated Zeiss Axioplan II imaging microscope. Image acquisition using Metamorph software (Universal Imaging Corporation) and movie processing were done as described previously (40). Movies are posted at the corresponding author's homepage at http://pinguin.biologie.uni-jena.de/phytopathologie/pathogenepilze/index.html.
Sequence data for Candida albicans was obtained from the Stanford Genome Technology Center website at http://www-sequence.stanford.edu/group/candida.
|
|
|---|
To investigate the role of both C. albicans formins during yeast and hyphal growth, we constructed mutant strains in which the complete ORFs of both alleles of BNI1 or BNR1 were sequentially deleted using PCR-based gene targeting methods (18). Homozygous mutant strains were generated from independent heterozygous strains for each formin and were phenotypically identical, indicating that correct gene targeting had occurred, as was verified by colony PCR. The absence of the formin ORFs in the homozygous but not in the heterozygous mutant strains was shown using internal primers. Additionally, to provide further proof that the observed phenotypes described below were solely due to the disruption of BNI1, a heterozygous BNI1/bni1 mutant strain was used to place the only remaining copy of the target gene under the control of the regulatable CaMAL2 promoter. This generated strains with wild-type-like phenotypes, including the ability to filament under permissive conditions during growth on maltose, while a shutdown of the MAL2 promoter during growth on glucose restored mutant phenotypes (not shown).
Polarized growth defects of formin mutants during the yeast growth phase. Cell cycle lengths of the wild type and the bni1 and bnr1 strains were determined using growth curves generated with cultures grown in liquid rich medium at 30°C and using in vivo time-lapse microscopy recordings calculating as the average cell cycle duration the time required between two consecutive bud emergence events. This revealed prolonged cell cycle durations of about 20 min for both formin mutants compared to that for the wild type (Table 3). Wild-type cells are characteristically ellipsoidal and show a length-versus-width ratio of approximately 1.3. During growth on solid media, cytokinesis in the wild type is most obvious by a rotational movement of mother and daughter cells out of the mother-bud axis (Fig. 1A). Heterozygous mutants with either BNI1/bni1 or BNR1/bnr1 were phenotypically like the wild type, suggesting the absence of gene dosage effects.
|
View this table: [in a new window] |
TABLE 3. Yeast phase growth characteristicsa
|
![]() View larger version (112K): [in a new window] |
FIG. 1. Growth defects of C. albicans formin mutants during yeast growth. Growth of the wild type and formin mutant strains was monitored using time-lapse microscopy over several hours (timescale is in hours:minutes) (A-C). In the movie of the wild type at http://pinguin.biologie.uni-jena.de/phytopathologie/pathogenepilze/index.html, a characteristic change of cell axes after cytokinesis can be observed (previous mother-bud axes are indicated as white, dotted lines and newly established axes as black, dashed lines in panels A to C). This results in lateral movement of cells such that wild-type colonies form a single cell layer (A). In the bni1 mutant, growth was irregular and cells were dispatched in three dimensions. A shift of mother-bud axes occurs but often only due to mechanical forces generated by new buds. The arrows denote enlarged septal sites (B). In the bnr1 mutant, growth axes are kept over several cell cycles, resulting in a linear array of mother and daughter cells (C). Cell shape and budding pattern of the indicated strains were analyzed after staining the cells with calcofluor (D). wt, wild type. Scale bar, 5 µm.
|
Characteristically, bnr1 cells were more elongated than the wild type, which resulted in a length/width ratio of 1.7. Cell separation defects of bnr1 cells were not as drastic as those seen in bni1 cells but still resulted in mother and daughter cells that were moved apart by colonial growth rather than by the cytokinesis of mother and daughter cells (Fig. 1C).
To determine if the swollen morphology of bni1 cells resulted also in an altered bud site selection pattern, cells were stained with calcofluor to visualize chitin-rich septal rings (Fig. 1D). In the wild type and in bnr1 cells grown at 30°C, a bipolar budding pattern was observed. In contrast, bni1 cells showed increased random budding resembling that of spa2 and wal1 cells described in previous studies (Fig. 1D) (40, 44).
C. albicans formin mutants do not show defects in endocytosis. Since we found defects in endocytosis in wal1 mutant cells in a previous study, we wanted to determine any deficiencies in vacuolar morphology and transport to the vacuole in formin mutant strains. To this end, we analyzed the uptake of the lipophilic dye FM4-64 by in vivo fluorescence time-lapse microscopy. This revealed no vacuolar phenotypes in bni1 and bnr1 yeast cells compared to the drastic defects in the wal1 mutant, suggesting that formins are not involved in endocytosis or in determining the vacuolar morphology of yeast cells (Fig. 2A; movies M4 to M6 at http://pinguin.biologie.uni-jena.de/phytopathologie/pathogenepilze/index.html). For comparison of FM4-64 uptake under inducing conditions, we induced yeast cells of the wild type and the formin and wal1 mutant strains to form germ tubes in the presence of serum at 37°C and simultaneously stained these cells with FM4-64. In the wild type, dye uptake resulted in staining of the apical compartment. Smaller vesicles in apical regionssometimes at the hyphal apexwere followed by larger vacuoles in subapical compartments. A similar distribution of endosomes and vacuoles was found in the bni1 and bnr1 mutant strains (Fig. 2B). In contrast, defects in endocytosis were observed in induced wal1 cells. Here, we found that dye uptake revealed an accumulation of vesicles at the tip of the germ tubes, indicating defects in the transport or fusion of vesicles.
![]() View larger version (27K): [in a new window] |
FIG. 2. Analysis of endocytosis. Endocytosis and the vacuolar morphology of the indicated strains were analyzed by monitoring the uptake of FM4-64 during the yeast stage (A) and hyphal stage (B). In panel A, images of yeast cells that were grown overnight and subsequently stained with FM4-64 are shown. The wild type (wt) and formin mutants generate a single large vacuole. In contrast, the wal1 cells exhibit fragmented vacuoles. Movies 4 to 6 at the website http://pinguin.biologie.uni-jena.de/phytopathologie/pathogenepilze/index.html show the time course of uptake of FM4-64. In panel B, images of FM4-64-stained cells induced to form germ tubes (3 h at 37°C in the presence of serum) are shown. Wild-type and formin mutant germ tubes show the characteristic larger vacuoles in their terminal regions, while the wal1 mutant displays fragmented vacuoles throughout the initial germ tube. Scale bars, 5 µm (A) and 10 µm (B).
|
![]() View larger version (72K): [in a new window] |
FIG. 3. Time-lapse analysis of the hyphal induction of formin mutants. In vivo time-lapse microscopy was used to monitor the initial phases of germ tube induction in the wild-type (wt), the bni1, and the bnr1 strains on solid media containing serum at 37°C (for complete movies, see movies M7 to -9 at http://pinguin.biologie.uni-jena.de/phytopathologie/pathogenepilze/index.html). Images from these movies acquired at the indicated time points are shown.
|
![]() View larger version (101K): [in a new window] |
FIG. 4. Mycelial growth defects of the bni1 mutant. The indicated strains were grown for 4 days at 37°C on plates containing either 10% serum or Spider medium prior to photography. Representative images of the edges of colony sectors which demonstrate the mycelial growth defects of the bni1 mutant are shown. wt, wild type.
|
![]() View larger version (97K): [in a new window] |
FIG. 5. Analysis of the actin cytoskeleton. Images of rhodamine-phalloidin-stained cells of the indicated strains are shown. Cells were grown overnight in yeast extract-peptone-dextrose (YPD) at 30°C, inoculated into fresh YPD (A) or YPD plus 10% serum (B), and grown for 3 hours at 30°C (A) or 37°C (B) prior to fixation and staining. Bar, 10 µm.
|
![]() View larger version (31K): [in a new window] |
FIG. 6. Localization of Bni1-GFP and the Spitzenkörper. (A) A BNI1-GFP-expressing strain (BNI1/BNI1-GFP) was induced with serum and stained with FM4-64. GFP fluorescence and differential inference contrast (DIC) images were used in an overlay showing the colocalization of Bni1-GFP with the FM4-64-stained Spitzenkörper. (B) Simultaneous localization of Bni1-GFP to the hyphal tip and to a future septal site. Note that in the DIC image no septum is apparent. (C) Comparison of Spitzenkörper morphologies in the wild-type (wt) and bni1 strains using FM4-64. Images of FM4-64-stained germ tubes that were induced by serum at 37°C for 3 hours are shown. Bars, 5 µm.
|
ras1G13V does not suppress the bni1 and wal1 phenotypes. Maintenance of polarized hyphal growth, but not the initiation of germ tube formation, was found to be blocked in both the bni1 and wal1 germ tubes. Since morphogenetic switching depends on the activation of the Ras1-GTPase, we wanted to determine if constitutive activation of Ras1 could bypass the bni1 or wal1 defects in polarized hyphal growth (Fig. 7A). To this end, the homozygous bni1::HIS1/bni1::URA3 strain was used and its URA3 marker was exchanged for the ARG4 marker using a PCR-based approach. We then used an integrative cassette containing the URA3 selectable marker gene, which targets the ras1G13V allele under the control of the MAL2 promoter to the ADE2 locus and placed this cassette in the BWP17, bni1, and wal1 backgrounds (14). Under inducing conditions (37°C and 10% serum) in the presence of maltose as the carbon source, wild-type and BWP17 strains (with or without the activated ras1G13V allele) showed profuse filaments both in liquid culture and on solid media (Fig. 7A). In contrast, bni1 germ tubes were phenotypically identical to those of strains harboring the activated ras1G13V allele. Moreover, the constitutive ras1G13V allele in the bni1 mutant background did not result in filamentation on solid media (insets in Fig. 7A). This indicates that ras1G13V, which in the wild-type background induces filamentation even at 30°C in complete medium (not shown), is not able to bypass the bni1 defect. Similarly, the phenotype of the wal1 mutant, which was previously shown to be defective in maintaining filamentous growth, was also not suppressed by the constitutive ras1G13V allele. This suggests that both pathways, including polarisome function and secretion, as well as endocytosis, are required for a stable hyphal growth phase in C. albicans.
![]() View larger version (75K): [in a new window] |
FIG. 7. Germ tube induction in C. albicans strains harboring the ras1G13V allele. Overnight cultures of the indicated strains were grown in liquid medium containing maltose as the sole carbon source to allow for MAL2 promoter-driven expression of the ras1G13V allele when applicable. Strains were then induced for 3 h with either 10% serum (A) or 10 mM cAMP (B) at 37°C and stained with calcofluor prior to photography. The insets of panel A depict microscopic images of colony edges of the strains grown on solid-medium plates containing serum. Expression of the constitutive ras1G13V allele did not enable mycelial growth in the bni1 or wal1 mutant strains. wt, wild type.
|
|
|
|---|
In true filamentous fungi, an apical body can be distinguished, that is, it is phase dark and forms at growing hyphal tips, and was found to be responsible for the growth direction of hyphal tips (1, 17, 19). This apical body, or Spitzenkörper, serves as the vesicle supply center in support of hyphal growth (2, 17). This Spitzenkörper can be stained by the lipophilic dye FM4-64, which stains endocytic vesicles (19). We have previously used this dye in the analysis of endocytosis in C. albicans. Deletion of the Wiskott-Aldrich syndrome protein C. albicans homolog WAL1 resulted in mutant strains that showed defects in the maintenance of polarized hyphal growth and were unable to form mycelia (40). Staining of yeast cells with FM4-64 did not reveal a prominent accumulation of vesicles but rather resulted in the delivery of the dye to and the visualization of vacuolar membranes (see also movies M4 to -6). Staining of germ tubes and hyphae resulted in almost immediate accumulation of the dye at the hyphal tip. This shows that C. albicans hyphae resemble in this respect hyphae of other filamentous ascomycetes. In a study by Crampin et al., a distinction based on molecular markers was drawn between polarisome components, for example, Cdc42, Spa2, and Bud6, and Spitzenkörper components, for example, Bni1 (8). In A. nidulans, the formin SEPA was shown to localize to the hyphal tip either as a crescent at the tip or as a spot near the tip, suggesting that SEPA is part of the Spitzenkörper (35). While in S. cerevisiae and in A. nidulans C-terminal tagging of formins appeared to result in functional fusion proteins, it appeared to be difficult to generate Bni1-GFP in C. albicans as the sole source of Bni1 (22). We as well as others found that Bni1-GFP colocalizes with the FM4-64-stained Spitzenkörper and in some cases simultaneously at the latest septal site as was also observed for SEPA in A. nidulans, suggesting mechanistic similarities (8, 22, 35). Very recently, Li et al. presented an analysis of BNI1 in C. albicans, which confirms our central findings of the role of Bni1 in the regulation of cell polarity. Their report shows that Bni1 is required for correct alignment and positioning of the mitotic spindle and that bni1 defects correlate with the mislocalization of the C. albicans Kar9 homolog (22).
In S. cerevisiae, Bni1 was shown to form a polarisome complex with Spa2, Bud6, and Pea2 (36). In C. albicans, Spa2 was localized in a manner similar to that of Bni1-GFP (44). This provides some further evidence for a conserved role of the polarisome in polarized hyphal growth. Interestingly, the C. albicans genome encodes a BUD6 homolog (orf19.5087) but not a PEA2 homolog (at least according to assembly 19), which suggests that species-specific regulation of the central morphogenetic protein network exists in fungal species.
Function of formins. The function of formins in the assembly of linear actin filaments is conserved in nature and has elegantly been analyzed in several recent studies (12, 13, 33, 34). Our analysis of the single formin deletion mutants did not reveal any drastic phenotypes in the assembly of the cortical actin cytoskeleton in growing yeast cells or germ tubes. Double deletion of both formin genes, BNI1 and BNR1, in S. cerevisiae results in synthetic lethality (22, 37), suggesting overlapping functions of both formins. This may also suggest a surrogate mechanism in which Bnr1 partially takes over Bni1 functions in C. albicans (22). Since bnr1 strains are able to form mycelia, either Bnr1 does not contribute to polarized morphogenesis or its function can be taken over by Bni1. We found that in a bnr1 deletion strain, cells are more elongated than in the wild type. Therefore, Bnr1 may have some function in the redirection of polarized secretion during septation which is promoted at a time when Bni1 may not localize to the bud neck and thus cannot take over Bnr1 function. Bni1, however, is required for the maintenance of polarized hyphal growth. Both C. albicans formins possess G protein binding and FH2 and FH3 domains corresponding to other Diaphanous-related formins. At the very C terminus, both C. albicans formins also contain a small stretch that is conserved with other DADs, suggesting similar regulations of formins in C. albicans by activation via G protein binding. The C-terminal localization of the DAD may explain the problems of generating C-terminal GFP fusions to BNI1 as the sole source of BNI1 in C. albicans, which may require a longer linker region between the DAD and GFP [three copies of (Gly-Ala) repeats in our construct].
The bni1 mutant phenotypes resemble those of the SPA2 and WAL1 deletions. In bni1 and wal1 cells, polarized morphogenesis could be induced, but after germ tube formation, hyphal growth ceased and mycelial development was abolished. This is of biological significance, indicating that upstream events of signal perception and signal transduction are executed in these mutant strains but run into a morphogenetic block at the level of secretion and/or endocytosis (Fig. 8). As a response, polarized delivery of vesicles can be initiated, but subsequently defects in the organization of the actin cytoskeleton generate decreased polar growth rates and swelling of the germ tubes. The less drastic effects in bni1 cells than in spa2 and wal1 cells may in fact be the result of the BNR1 background and at least partial suppression (22). However, Bnr1 is almost 250 amino acids shorter than Bni1 and thus may lack some of the interaction potential of Bni1, which needs to be determined in future analyses.
![]() View larger version (43K): [in a new window] |
FIG. 8. The actin cytoskeleton as a downstream part of signal transduction in regulating polarized morphogenesis. A model is presented in which the central pathways to the actin cytoskeleton regulating endocytosis and secretion are incorporated via Cdc42 into the morphogenetic cascade of C. albicans. Ras1-induced signaling activates the cAMP pathway and a MAP kinase cascade that activates hypha-specific gene expression and may also lead to activation of the Cdc42 module. Defects in the actin cytoskeleton machinery affecting either endocytosis (e.g., via Wal1) or polarisome function (e.g., via Bni1 or Spa2) inhibit mycelial development, indicating the relevance of membranous vesicle transport and cycling for polarized growth. The dashed arrow connecting Cdc42 and Wal1 is to indicate the fact that Wal1 lacks a G protein binding domain and can thus be activated only indirectly by Cdc42. Some other pathways regulating gene expression upon hyphal induction, e.g., the Tup1/Nrg1/Rbf1 pathway and the pH-Rim101 pathway, have been omitted for clarity.
|
In a recent study, an explanation of how transcription via Efg1 may influence growth decisions and activate actin cytoskeleton dynamics was provided. Under serum-inducing conditions, transcript levels of CDC24, encoding the guanine nucleotide exchange factor of Cdc42, transiently increase, which may result in an increase in Cdc42 activity that may trigger germ tube formation (3). Other genes involved in the organization of the actin cytoskeleton, e.g., RHO3 and BEM2, were found to be regulated in a similar manner (28).
Taken together, our results on the characterization of WASP and formins in C. albicans suggest a model of how regulatory networks signal to the actin cytoskeleton to promote growth decisions in C. albicans (Fig. 8). Our data also indicate that there are two largely separate pathways leading to secretion via formins and to endocytosis via WASP. Deletion of genes affecting either pathway will likely cripple the maintenance of polarized hyphal growth and may provide new means and targets for antifungal drug therapy to specifically perturb the hyphal growth phase in C. albicans.
Future research will be directed to elucidate how the interplay between secretion and endocytosis is regulated at the molecular level to achieve a balanced state of polarized cell growth.
This research was supported by the Deutsche Forschungsgemeinschaft, the Friedrich-Schiller University, and the Hans-Knöll Institute.
These authors contributed equally to this work. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»