Previous Article | Next Article ![]()
Eukaryotic Cell, June 2004, p. 632-645, Vol. 3, No. 3
1535-9778/04/$08.00+0 DOI: 10.1128/EC.3.3.632-645.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Department of Microbiology, University of Marburg, and Max-Planck-Institute for Terrestrial Microbiology, D-35043 Marburg, Germany
Received 5 November 2003/ Accepted 2 March 2004
|
|
|---|
|
|
|---|
The biological function of the KinI family members is less clear than that of conventional kinesin. The KinI family received this nomenclature due to the location of the motor domain and the structure of the protein (33). Kinesins of this family are monomeric proteins and are not able to move along MTs in the conventional sense, but instead catalyze the depolymerization of MTs in vivo and in vitro (6, 18, 21, 29). In mammals a KinI protein, CgMCAK, localizes to the kinetochores in early prophase, and an MCAK deficiency results in chromosome segregation defects. This may be explained through an altered MT depolymerization rate. Overexpression of the gene resulted in the depolymerization of cytoplasmic and spindle MTs, suggesting roles for this kinesin family outside of mitosis (25).
Recently, two kinesins, Klp5 and Klp6, which have catalytic properties similar to those of KinI kinesins, were characterized in the yeast Schizosaccharomyces pombe (45, 46). However, their structure and activity led to the definition of a new family named Kip3, with Saccharomyces cerevisiae Kip3 as the founding member (22, 46). In S. cerevisiae, Kip3 is involved in nuclear migration in preparation for mitosis (5, 7, 27). Interphase nuclei are pushed around in the mother cell through growing and shrinking MTs emanating from the spindle pole body. Prior to mitosis, nuclei move towards the budding neck. This first movement depends on the function of Kip3, whereas the subsequent distribution of the two daughter nuclei is dependent on cytoplasmic dynein, MTs, and cortex-associated proteins (26, 28, 39, 40). MTs emanate from the spindle pole body and grow towards the cortex. Several proteins which are delivered to the cortex and in turn mediate contact between astral MTs and the cortex are associated with the growing plus ends (14, 24). A deletion of Kip3 from S. cerevisiae did not impair its vegetative growth and caused only a slight increase in binucleate mother cells at a low temperature. These effects were much stronger in dynein (dyn1) deletion strains at a low temperature and were largely increased in kip3 dyn1 double mutants at a high temperature. These results suggested that Kip3 is responsible for spindle positioning in the absence of dynein and thus serves overlapping functions with this motor (4, 5). In Schizosaccharomyces pombe, Klp5 and Klp6 are structurally very similar, and the deletion of either one or of both is not lethal (46). In contrast to the case for S. cerevisiae kip3 mutants, nuclear migration is not affected in
klp5 or
klp6 strains. However, MTs are stabilized in both fungi, and mitosis and meiosis are impaired in Schizosaccharomyces pombe (45). Klp5 and Klp6 are required for normal chromosome movement in prometaphase, although this function is not essential for successful mitosis. On the other hand, the two kinesins are essential for meiosis. Klp5/6-green fluorescent protein (GFP) fusion proteins localized to spindle and cytoplasmic MTs with no bias to either the plus or the minus end of the filaments (46). The studies of KinI kinesin family members in different organisms demonstrate that despite similar biochemical properties, the cellular processes affected may be different.
Another well-characterized family of mitotic kinesin motors is the BimC family. The founding member of this family was discovered in A. nidulans by a screen for temperature-sensitive lethal mutations (30). Cloning of the bimC (blocked in mitosis) gene revealed that it encodes a kinesin motor protein (8). The bimC4 mutant phenotype at a restrictive temperature is characterized by a block in spindle pole separation and thus the formation of monopolar rather than bipolar spindles. The BimC motor is a homotetramer which cross-bridges antiparallel MTs and produces a force towards the spindle poles. A motor with an opposing force is KlpA, a member of the C-terminal motor domain kinesin family. The deletion of this gene from the genome of A. nidulans causes a suppression of the bimC4 mutation (31).
We studied the Kip3-like motor KipB of A. nidulans to investigate its possible role in nuclear migration and found that this motor is required for spindle positioning within hyphal compartments, for the integrity of the MT cytoskeleton, and for proper chromosome distribution during mitosis.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. A. nidulans strains used for this study
|
|
View this table: [in a new window] |
TABLE 2. Plasmids used for this study
|
Cloning of the
kipB disruption construct.
A BamHI-released argB fragment from pHW-arg (44) was cloned into the BglII sites of the kipB gene in order to disrupt the motor domain of the protein. Homologous integration of the construct (pPR13) in A. nidulans would lead to a deletion of 18 bp of the kipB gene. In addition to the deletion, the argB gene disrupts the coding region of kipB. The disruption construct was transformed into the arginine-auxotrophic A. nidulans strain SRF200.
GFP labeling of KipB (pPR11 and pPR38). For the C-terminal construct of the KipB::GFP fusion protein, a 3.3-kb BamHI fragment derived from pPR5 and including kipB was cloned into pBluescript KS(). This led to a truncated version of the protein in which the first 690 amino acids were fused to GFP. The alcA promoter was cloned upstream of kipB as a KpnI-XhoI fragment and sgfp was cloned downstream as an XbaI restriction fragment into the polylinker of pBluescript KS() (pPR11). For the N-terminal construct, a 1.2-kb (starting from ATG) fragment of kipB from pPR19 was amplified with the primers kipB-Ngfp-fwd (5'-ATGGGGGCCTCAAGCGAC-3'), with an AscI site added at the 5' end, and kipB-Ngfp-rev (5'-CGCTTTGAGTTCGTTAATTAATGCC-3') and was cloned into the pCMB17apx plasmid (kindly provided by V. Efimov, Robert Wood Johnson Medical School, Piscataway, N.J.) at AscI-PacI sites (pPR38). Homologous recombination of this construct into the kipB locus led to an N-terminal GFP fusion of the entire KipB protein under the control of the alcA promoter and a truncated 5' region under the control of the natural promoter.
mRFP1 labeling of KipB (pPND1). mRFP1 was amplified with the primers KpnI_mRFP1_fwd (5'-CGGTACCATGGTCTCCTCCGAGG-3') and AscI_mRFP1_rev (5'-CGGCGCGCCGGCGGTGGA-3') and was cloned into the KpnI-AscI sites of the pPR38 plasmid, replacing the sequence for GFP. This resulted in an N-terminal mRFP1 fusion of 1.2 kb (starting from ATG) of KipB under the control of the alcA promoter.
Fluorescence microscopy and live cell image acquisition and analysis. Cells were grown in glass-bottomed dishes (World Precision Instruments, Berlin, Germany) in 2 ml of minimal medium containing glycerol, pyridoxine, and/or arginine or minimal medium containing 2% ethanol, pyridoxine, and/or arginine. The cells were incubated at 30°C for 15 h and images were captured at room temperature with an Axiophot microscope (Zeiss, Jena, Germany), a Planapochromatic 63x or 100x oil immersion objective lens, and a 50-W Hg lamp. Images were collected and analyzed with a Hamamatsu Orca ER II camera system and Wasabi software (version 1.2). Time-lapse series were obtained with an automated Wasabi program that acquires series of images with 3, 10, or 20 s of pause time, 0.5 or 0.75 s of exposure time, and about 40 exposures in a sequence.
Nucleotide sequence accession number. The sequence of A. nidulans kipB is available in the EMBL database under accession number AJ620863.
|
|
|---|
![]() View larger version (19K): [in a new window] |
FIG. 1. Relatedness analysis of the 11 A. nidulans and 10 N. crassa kinesins. A most likely phylogenetic tree for 74 kinesins was built with Treepuzzle (http://www.tree-puzzle.de/), using a maximum-likelihood algorithm. For an evaluation of the statistical significance of the topology, 25,000 replicating puzzle steps were performed. The substitution model Whelan-Goldman 2000 was used because it produced a consensus tree which was in good agreement with the published data (37). For the construction of the tree, we chose fungal kinesin sequences and additional kinesins from other organisms that are characteristic for the different families. Note that the A. nidulans exon-intron borders were only experimentally determined for BimC, KlpA, KinA, KipA, and KipB. In the case of N. crassa, only the conventional kinesin NcKHC has been analyzed experimentally. The other primary structures of the proteins of A. nidulans and N. crassa are based on the predictions in the annotation process at the Whitehead Institute database. The N. crassa Kip3 homologue was annotated manually. The origins of the kinesin sequences were as follows: An, A. nidulans; Nc, N. crassa; Spo, Schizosaccharomyces pombe; Ce, Caenorhabditis elegans; Mm, Mus musculus; Um, Ustilago maydis; Sc, S. cerevisiae; Ch, Cochliobolus heterostrophus; Hs, Homo sapiens; Ca, Candida albicans; Dm, Drosophila melanogaster; Cg, Cricetulus griseus; Sp, Strongylocentrotus purpuratus. The A. nidulans and N. crassa sequences are boxed.
|
![]() View larger version (79K): [in a new window] |
FIG. 2. Characterization of A. nidulans kinesin kipB. (A) Panel a shows a schematic of the kipB locus. The open reading frame and the transcript are indicated by arrows, in which the intron position is marked. Panel b shows a Northern blot analysis of RNA isolated from mycelia of strain FGSC26, incubated at 37°C, and harvested after 16 h of vegetative growth. The RNA was isolated from the mycelia and hybridized to a kipB-specific probe. (B) Alignment of A. nidulans KipB with homologous kinesin sequences from N. crassa (NCU061441), Schizosaccharomyces pombe (Klp5 and Klp6), and S. cerevisiae (Kip3). The alignment was done with DNAstar by using MEGALIGN (CLUSTAL) with a window size of 5 and a gap length penalty of 10. The beginning and end of the highly conserved motor domains are indicated by asterisks above the sequences. The ATP-binding motif is boxed and the putative MT binding site is indicated by lines above the sequences. The 18-amino-acid motif at the N terminus is highlighted by a dashed line above the sequences.
|
kipB) cosegregated with the argB marker. Two strains obtained by the cross (SPR13 and SPR22) were chosen for further analysis with respect to polarized growth, mitochondrial movement, and nuclear distribution. We did not detect any differences from the wild type, suggesting that KipB is not involved in those processes or that other kinesin motors are able to substitute for the function of KipB.
![]() View larger version (35K): [in a new window] |
FIG. 3. Disruption of the kipB gene. (A) Schematic of the strategy. The nutritional marker gene argB was inserted into kipB and thereby deleted 18 bp. (B) Southern blot analysis of a kipB disruption strain (SPR13). Genomic DNAs of the wild type (FGSC26) and the kinesin disruptant strain were isolated, digested with SacI (left) and EcoRV (right), separated in a 1% agarose gel, blotted, and hybridized with the probe shown in panel A. (C) Effect of different benomyl concentrations on colony growth of wild type (RMS011) and kipB disruptant (SPR13). Strains were inoculated on agar plates at 37°C and supplemented with the indicated benomyl concentrations dissolved in dimethyl sulfoxide.
|
kipB mutant was still able to grow and was only inhibited at concentrations above 0.95 µg/ml (Fig. 3C). The difference in benomyl sensitivity was independent of the growth temperature. These results suggest that the kinesin KipB destabilizes MTs in A. nidulans.
To directly study the effect of the
kipB mutation on MT stability, we compared the MT cytoskeletons of the wild type and a
kipB mutant strain (SPR30) in which alpha-tubulin was labeled with GFP. In single-cell yeasts such as S. cerevisiae and Schizosaccharomyces pombe, the effects of mutations in genes encoding MT-destabilizing components can be easily documented since the cytoplasmic or astral MTs in those strains elongate even after contacting the cortex. As a result, MTs appear bent along the cortex (3). For filamentous fungi, differences in the cytoplasmic MT network have not yet been detected (34). Likewise, we observed only a slight effect in the
kipB mutant in comparison to wild-type interphase cells. The MTs appeared to be more curved, which could have been due to continuous growth after reaching the hyphal tip (Fig. 4A). However, it was difficult to follow a single MT along the entire length through the compartment. The level of alpha-tubulin was not higher in the deletion mutant than in the wild-type strain (data not shown). A striking difference in MT organization became obvious when we looked at mitotic cells (Fig. 4B). During mitosis, cytoplasmic MTs are almost entirely depolymerized to provide tubulin subunits for the assembly of the mitotic spindle and the formation of astral MTs (32). In the
kipB mutant strain, however, several cytoplasmic MTs were observed during mitosis. In addition, astral MTs grew into long filaments.
![]() View larger version (65K): [in a new window] |
FIG. 4. Morphology and MT organization in kipB mutant strain and wild type. MTs were observed as -tubulin-GFP fusions by fluorescence microscopy (see Materials and Methods). Top rows, wild type; bottom rows, kipB strain. (A) Cytoplasmic MTs. In the wild type, they are long and straight, while they display a curved pattern in the kipB mutant. (B) Mitotic spindles. In the wild-type spindle, the cytoplasmic MT remained, while in the kipB strain, three filaments are visible. Bar, 5 µm.
|
kipB mutants were highly mobile, overpassed each other, and frequently moved long distances through the cytoplasm (see Video S2 in the supplemental material). However, interphase nuclei were again evenly distributed. During their migration process, 64% of the spindles had a bent shape (53 spindles from two independent strains were analyzed). For the wild type, such a shape was only observed for 23% of the spindles (52 spindles analyzed).
![]() View larger version (67K): [in a new window] |
FIG. 5. Positioning of mitotic spindles in the wild type and the kipB disruptant. Images from a time-lapse series are displayed (times are indicated, in seconds, in the upper right corner of each panel). (A) Wild-type synchronized mitoses, with evenly distributed spindles along the length of the hypha. (B) Mitoses in the kipB mutant strain, with defects in spindle positioning and morphology (sharp angled bow-like structures) and with a high level of spindle mobility through the cytoplasm, which leads to overlapping of the spindles (arrows). Bar, 5 µm. (C) Quantification of different spindle morphologies and spindle behavior in the wild type and the kipB mutant strain (also see Videos S1 and S2 in the supplemental material).
|
kipB mutant, we compared spindle behavior in both the wild type and the mutant by using live cell imaging. In fungi, mitosis starts with an early prophase, during which the spindle pole bodies divide and separate towards opposite sites, generating a half-spindle. During metaphase, the bipolar spindle is completely formed and the chromosomes are attached to the spindle MTs via the kinetochores. The chromosomes are usually scattered over the middle one-third to one-half of the spindle rather than arranged in a metaphase plate. Anaphase occurs in two stages. During anaphase A, the chromatids are separated and migrate asynchronously along the entire length of the spindle to the respective spindle poles, and the astral MTs start to be developed. During anaphase B, the spindle elongates rapidly between the two spindle pole bodies and the astral MTs reach their maximal length (1). The first stage (prophase to metaphase) has a short duration (60 to 80 s). The mutant exhibited a much longer anaphase A, with a duration of 400 to 600 s, than did the wild type (160 to 200 s) (Fig. 6; also see Videos S3 [wild type] and S4 [mutant] in the supplemental material).
![]() View larger version (57K): [in a new window] |
FIG. 6. kipB disruption causes a delay in mitotic progression. The images show time-lapse analyses of mitosis in germlings of the wild type (strain GFP-tubA) (see Video S3 in the supplemental material) (A) and the kipB mutant (SPR30) (see Video S4 in the supplemental material) (B). MTs were labeled with GFP. The stages of mitosis are indicated in the upper left corner of the pictures. I, prophase to metaphase (short spindle); II, anaphase A (spindle elongates very slowly, with the appearance of astral MTs [indicated by arrows]); III, anaphase B (spindle elongates rapidly and doubles or triples in length). The cells were grown overnight at 30°C and were observed at room temperature. Images were taken every 20 s, and a selection of them are displayed here. The time points (in seconds) are indicated in the upper right corner of the pictures. Bar, 5 µm. (C) Summary of the time intervals of different mitotic phases in the wild-type and kipB mutant strains (see Videos S3 [wild type] and S4 [mutant] in the supplemental material).
|
kipB with bimC4.
Since KipB appears to play a role in mitosis, we tested the
kipB mutation for its genetic interaction with a temperature-sensitive kinesin motor mutation, the bimC4 mutation. We constructed two bimC4
kipB double mutant strains and compared their growth with the growth of strains with corresponding single mutations (Fig. 7). We performed the assay at temperatures that were permissive (30°C), restrictive (42°C), and semipermissive (37°C) for the bimC4 mutant. We found that the double mutant displayed increased temperature sensitivity compared with the two single mutants. At the intermediate temperature, the double mutant had a stronger growth defect than the bimC4 mutant, suggesting that there is a genetic interaction between the two kinesins (Fig. 7).
![]() View larger version (138K): [in a new window] |
FIG. 7. Disruption of kipB is synthetically lethal with bimC4. Comparison of colony growth of SPR93 (wild type), MO62 (bimC4), SPR13 ( kipB), and two double mutants (SPR88 and SPR90) at 37 and 42°C for 3 days and 30°C for 5 days.
|
kipB mutation on nuclear division, we compared the wild type and the
kipB mutant for chromosome loss during mitosis. Since conidiospores of A. nidulans are haploid, any loss of one of the eight chromosomes would lead to the death of the spore and thus to a germination defect. However, we found no difference in the viabilities of the conidiospores harvested from the two strains, suggesting that there is a more subtle effect from the mutation. Therefore, we studied putative chromosome loss by using diploid strains (Fig. 8A). These strains can be obtained from conidiospores that are generated in a heterokaryon. Diploid spores are formed at a low frequency and can be stably maintained when a selection pressure is applied. If these spores lose one chromosome during mitosis, they reduce the number of chromosomes to the haploid set, and in the absence of the selection pressure, can grow to mature colonies (19). If strains with green spores are used in combination with strains with yellow spores for the construction of the diploids or if strains with white spores are used in combination with strains with yellow spores, haploidization can be easily visualized via the colors of the colonies and different sectors. Chromosome loss can be stimulated by the application of low concentrations of benomyl. We constructed a heterozygous diploid strain between the
kipB mutant (yellow spores; SPR13) and a wild-type strain (white spores; GR5) and a homozygous
kipB diploid strain (yellow and green spores for the haploid parents) (SPR13 and SPR22) and compared their frequencies of haploidization with that of a wild-type diploid strain (RMS012). The frequency of sectors with different colors was very low for the wild type and increased with increasing benomyl concentrations. In contrast, diploids that were heterozygous for the
kipB mutation (kipB/
kipB) (SPR55) formed more haploid sectors than the wild type. Interestingly, this frequency decreased with increasing benomyl concentrations. The
kipB homozygous diploid (
kipB/
kipB) (SPR60) appeared to have an even lower frequency of haploidization than the wild type (Fig. 8B).
![]() View larger version (51K): [in a new window] |
FIG. 8. Haploidization of diploids of kipB/kipB (wild type; RMS012), kipB/kipB (heterozygous; SPR55), and kipB/ kipB (homozygous; SPR60) organisms. (A) Colony growth on plates without benomyl (left) and with 0.5 µg of benomyl/ml (right). The arrows point to haploid sectors. (B) The numbers of haploid sectors were counted for the three strains denoted in panel A. For the homozygous kipB strain, we analyzed 10 diploids, for the heterozygous strain we analyzed 6 diploids, and for the wild type, we analyzed 1 diploid. The average numbers of sectors are shown.
|
KipB localizes to mitotic, astral, and cytoplasmic MTs. To localize KipB in A. nidulans, we constructed an N-terminal fusion protein with GFP. Approximately 1.2 kb from the 5' region of the coding sequence was cloned behind GFP. The chimeric protein was expressed under the control of the inducible alcA promoter (pPR38). A. nidulans SRF200 was transformed with the circular plasmid pPR38 and transformants were screened for GFP fluorescence under inducing conditions (with threonine as a carbon source). These strains were analyzed for the integration of the plasmid, and a strain with a single ectopic integration as well as a strain with a single homologous integration was chosen for further analysis (with glycerol and/or ethanol as a carbon source) (Fig. 9). The ectopic copy resulted in an aberrant, nonfunctional fusion protein, whereas homologous integration resulted in a duplication of the region where the plasmid integrated. The full-length KipB protein was N-terminally tagged with GFP. Both strains displayed normal growth on plates. We found that the GFP-KipB protein localized to cytoplasmic MTs in interphase cells and to spindle and astral MTs during mitosis (Fig. 9; also see Videos S5 [spindle] and S6 [cytoplasmic] in the supplemental material). However, the protein displayed a discontinuous pattern along the MTs. The spots disappeared when benomyl was added (results not shown). Patches of GFP-KipB appeared to be aligned in the cell, and time-lapse studies revealed that the spots moved independently along MTs. In the hyphal tip, where MTs are oriented with their plus ends toward the cortex, the spots moved only toward the tip. In the middle and the rear of the hyphal tip compartment, where MT polarity is mixed (unpublished results), GFP-KipB spots moved in both directions (see Video S9 in the supplemental material). To discriminate between the possibilities that GFP-KipB spots are transported together with the growing plus end and that the spots move along MTs independently of the plus ends, we studied the dynamics of plus ends and compared them to the behavior of the GFP-KipB spots. Whereas the MT plus ends grew with a speed of 9 ± 3 µm/min, the GFP-KipB spots showed a larger range of speeds and no pronounced peak. This suggests that GFP-KipB moves toward the MT plus end.
![]() View larger version (46K): [in a new window] |
FIG. 9. Localization of GFP-KipB fusion proteins. (A) Coiled-coil prediction (23) for KipB (window size 14). A significant coiled-coil probability was found for amino acids 390 to 408 and 500 to 600. The schematic drawing shows the domains of the KipB protein, including globular heads (gray), the amino-terminal motif of 18 amino acids (white), the coils (curved lines), and the tail domain (blue). The amino acid positions are represented on the line below. (B) Localization of different GFP-KipB fusion proteins. (a and b) Time-lapse analysis of full-length KipB protein tagged N-terminally with GFP (see the schematic drawings of the different constructs above each series of photos). For strain SPR96, the images show the localization of GFP-KipB onto spindle and astral MTs, with arrows pointing to the plus ends of the astral MTs (see Video S5 in the supplemental material) (a) and spots of GFP-KipB moving onto cytoplasmic MTs (see Video S6 in the supplemental material) (b). (c and d) Colocalization between a truncated version of mRFP1-KipB and the mitotic spindles (see Video S8 in the supplemental material) for strain SPR98. Left, mRFP1-KipB; middle, -tubulin-GFP; right, merged images of the first two photos. (d) Localization to cytoplasmic MTs. The arrow points to the plus end of the MT in the hyphal tip. (e and f) C-terminal fusion of KipB with GFP (see Video S7 in the supplemental material) in strain SPR2. The images show the localization onto mitotic and astral (arrow) MTs (e) and cytoplasmic MTs (arrows) (f). Bar, 5 µm.
|
|
|
|---|
In this paper, we characterized a new kinesin, KipB, from A. nidulans. Several lines of evidence showed that it is involved in the turnover of all populations of cellular MTs, including interphase cytoplasmic, mitotic, and astral MTs: (i)
kipB mutants were less sensitive to the MT-destabilizing drug benomyl, (ii) the MT cytoskeleton of interphase cells appeared altered, (iii) the spindle positioning was affected, (iv) mitotic progression was delayed, (v) an increased number of cytoplasmic MTs remained intact during mitosis, (vi) the spindle morphology was altered, and (vii)
kipB heterozygous strains showed an increased instability of diploid nuclei. Its effect on MT stability and its sequence similarities to other motors in the databases place KipB into the Kip3 family, which thus supports the distinction between the KinI family, consisting of higher eukaryotic kinesin depolymerases, and the fungal Kip3 family.
KipB is involved in spindle positioning and mitosis.
In S. cerevisiae, Kip3 was shown to be involved in nuclear migration to the bud site in preparation for mitosis (7). As a consequence of this migration, the frequency of binucleate mother cells increases. When we looked at the nuclear distribution in germlings of an A. nidulans
kipB mutant, we could not find any difference in the distribution pattern. However, when we did time-lapse studies of mitosis using GFP-tagged tubulin strains, we realized that individual mitotic spindles moved within the cytoplasm, although most of the spindles were positioned as in the wild type. In wild-type cells, the spindles are likely to interact with the cortex through astral MTs. Cortical proteins such as ApsA are probably required for the contact (9-11, 47). In the
kipB mutant, astral MTs were stabilized and were likely to reach the cortex and subsequently extend further along it. They could then make contact with cortical proteins at a distance from their "own" attachment site, and pulling forces could then cause movement. The spindle movement phenotype was striking and raises the question of why we did not observe an effect on nuclear distribution in interphase cells. This finding suggests that besides nuclear separation through mitosis, other mechanisms exist which further distribute nuclei (47).
Besides the effect of the
kipB mutation on spindle positioning, we found a defect in mitosis. The separation of chromosomes requires the coordinated action of motor proteins and MT dynamics. We observed a delay in mitotic progression and an increase in bent mitotic spindles in
kipB mutant strains. Both effects may be explained by the effect of the motor deletion on the dynamics of MTs and thus a disruption of the balance of forces exerted on the kinetochores (12, 13, 45). The effect of the mutation on the integrity of the mitotic apparatus is also reflected by the results of the experiment with diploid strains. Heterozygous mutants displayed an increase in chromosome loss. Interestingly, homozygous
kipB diploids showed a reduced frequency of chromosome loss in comparison to kipB wild-type diploids. This suggests a gene dosage effect and could mean that haploidization after the initial loss of one chromosome requires a certain amount of the KipB protein to reduce the chromosome number to a haploid set. In the heterozygous situation, the initial chromosome loss might be very frequent, so a further reduction of the chromosome number would occur rapidly. Interestingly, the destabilization of MTs by the addition of increasing amounts of benomyl suppressed this effect. This suggests that the disassembly of MTs in the mitotic spindle and thus chromosome distribution are affected by different concentrations of KipB.
How to reach the end? We studied the following three GFP constructs: an N-terminal fusion with the full-length KipB protein, an N-terminal fusion with a truncated version of KipB which only consisted of the first 408 amino acids from the N terminus, and a C-terminal GFP fusion, which deleted about 300 amino acids from KipB. Whereas the truncated versions stained the entire length of the filaments, the full-length protein predominantly displayed a discontinuous distribution along MTs, and the GFP spots moved along the filaments. The question was raised regarding how KipB moves along MTs. One accepted model for conventional kinesin movement is the hand-over-hand model, which requires dimerization of the protein. In KipB, as in Klp5, Klp6, and Kip3, only short regions for a potential coiled-coil formation were found. Nevertheless, they might be sufficient for the mediation of an interaction. Indeed, heterodimerization has been shown for Klp5 and Klp6 (13). Therefore, KipB may form homodimers (since we only found one kinesin from this family in the A. nidulans genome) and move along MTs in the conventional sense rather than by diffusion. However, we observed that GFP-KipB formed a discontinuous distribution pattern along MTs. Since the fluorescence signal from single GFP-KipB molecules would be below the detection level, it is likely that we observed aggregates of GFP-KipB or vesicles which contained or were decorated with GFP-KipB. Those vesicle-like structures could be the unit by which KipB is transported toward the MT plus ends, on which the motors would act as a depolymerase. This mechanism would be different from the one described for the transportation of dynein toward the plus ends of MTs in A. nidulans. In that case, conventional kinesin appeared to be the main driving force, but spots along the MTs were not visible. Thus, it is more likely that individual dynein motor proteins are the cargo for kinesin (49). The challenge for future experiments will be to identify motor proteins which may be involved in the transportation of KipB or to prove whether fungal Kip3 kinesins themselves can processively move along MT filaments.
This work was supported by the Fonds der Chemischen Industrie, the Max-Planck-Institute for Terrestrial Microbiology, and the Deutsche Forschungsgemeinschaft (DFG).
Supplemental material for this article may be found at http://ec.asm.org. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»