Previous Article | Next Article ![]()
Eukaryotic Cell, August 2003, p. 671-677, Vol. 2, No. 4
1535-9778/03/$08.00+0 DOI: 10.1128/EC.2.4.671-677.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Molecular Biology Institute and Department of Microbiology, Immunology and Molecular Genetics, University of CaliforniaLos Angeles, Los Angeles, California 90095-1570
Received 3 January 2003/ Accepted 12 May 2003
|
|
|---|
|
|
|---|
Constitutive transcription of protein-coding genes generates polycistronic transcripts, which are processed to produce mature monocistronic mRNAs (reviewed in reference 3). Maturation of the polycistronic transcripts involves cleavage within intergenic spaces, trans-splicing of a 39-nucleotide (nt) spliced leader sequence to the 5' end of all mRNAs, and polyadenylation of 3' ends. trans-splicing of precursor RNAs occurs by mechanisms similar to those for cis-splicing in higher eukaryotes and involves U2, U4, and U6 small nuclear RNAs (24). Processing of the precursor transcripts occurs rapidly, and polycistronic intermediates are generally not observed. Consequently, regulation of genes expressed by RNA polymerase II occurs predominantly at the posttranscriptional level.
Gene regulation in trypanosomes has been studied most extensively for species that undergo morphological and physiological transformations during their life cycles. In the case of Trypanosoma brucei, the causative agent of African sleeping sickness, variant surface glycoprotein gene mRNA shows a high degree of stage-specific expression. Sequence elements within the 3' untranslated regions (3' UTRs) of these genes have been shown to influence the mRNA levels (19, 25). A U-rich 26-mer in the 3' UTRs of the surface protein genes EP and GPEET in the insect form of T. brucei has been found to be important for the developmental regulation of these genes (9, 20). These U-rich elements appear to be similar to the destabilizing AU-rich elements present in the 3' UTRs of mammalian mRNAs involved in growth and differentiation (15). Similar sequence elements present in the mRNAs of Trypanosoma cruzi genes encoding mucin-like proteins have also been shown to regulate mRNA levels (5).
An octamer consensus sequence [(C/A)AUAGAA(G/A)] that is present in several mRNAs of the trypanosomatid Crithidia fasciculata and is required for the cell cycle-dependent regulation of the mRNAs containing it has been described previously (2, 11, 13, 18). The mRNAs of genes encoding the large subunit of the nuclear single-stranded DNA-binding protein (RPA1), dihydrofolate reductase-thymidylate synthetase (DHFR-TS), the kinetoplast type II DNA topoisomerase (TOP2), and a histone H1-like kinetoplast DNA-binding protein (KAP3) all cycle in parallel as cells progress through the cell cycle. Levels of all these mRNAs are maximal just prior to S phase and then decline as DNA synthesis is completed. Episomal constructs bearing truncated RPA1 or TOP2 genes and their 5' UTRs allowed the identification of sequences in the 5' UTRs of these genes that are required for periodic accumulation of the mRNAs. Mutation of octamer consensus sequences present in the 5' UTRs of these genes abolished the periodic accumulation of the mRNAs and resulted in mRNA levels close to the maximum levels attained by the cycling transcripts and showing little variation throughout the cell cycle (2, 11). The central hexamer (AUAGAA) in the consensus sequence is absolutely conserved in the mRNAs that have been observed to cycle so far, and single-base changes in the hexamer have been shown to abolish cycling of the mRNA levels.
In the present work we have examined the sequence requirements for cycling of the C. fasciculata KAP3 gene, a gene encoding a histone H1-like protein associated with kinetoplast DNA (8, 26). A plasmid construct containing the KAP3 gene with 5' and 3' flanking sequences was used to insert the green fluorescent protein (GFP) gene in frame within KAP3 for use as a sequence tag to permit easy discrimination of the expressed transcript from that of the chromosomal KAP3 mRNA during the cell cycle. We show here that cycling of the KAP3-GFP transcript requires octamer sequence elements both in the KAP3 3' UTR and in the sequence 5' of the KAP3 splice acceptor site.
|
|
|---|
GEM11 genomic library of C. fasciculata was screened by using a labeled fragment of the KAP3 coding region (8). Positive clones were picked and digested with XhoI. To construct plasmid pJCH1, a 2.1-kb gel-purified XhoI fragment of a
GEM11 clone containing the KAP3 gene, 1.0 kb of 5' flanking sequence, and 0.7 kb of 3' flanking sequence was cloned into the SalI site of pX63HYG (4). The pX63HYG plasmid contains the hygromycin selectable marker flanked by the L. major 5' and 3' flanking regions of the DHFR-TS gene for expression of the drug resistance marker (hygromycin B phosphotransferase [HYG]). An additional
1.2-kb XbaI-Sau3AI fragment containing the 3' flanking sequence of the KAP3 gene was cloned into the XbaI-BamHI sites of pGEM7Z(+) (Promega) to create the pJL1 plasmid. The pJL1 plasmid was subsequently digested with XbaI and SpeI, and the resulting
0.69-kb fragment was cloned into the XbaI site of pJCH1 to yield plasmid pJCH2. Construction of a KAP3-GFP expression plasmid. To generate plasmid pMA1, expressing KAP3-GFP transcripts, the full coding region of the enhanced GFP (EGFP) gene was PCR amplified from plasmid pEGFP-1 (BD Clontech, Palo Alto, Calif.) with oligonucleotides G10 (5'-GCAGCCAAGACGGCCATGGTGAGCAAGGGCGAG-3') and G11 (5'-GAAGGCCGTCTTGGCGATATCCTTGTACAGCTCGTCCATG-3') (underlining indicates added BglI and EcoRV sites), digested with BglI, and ligated into BglI-digested pJCH2.
Immunolocalization of the KAP3-GFP protein. C. fasciculata cells expressing the pMA1 plasmid at approximately 2 x 107 cells per ml were harvested by centrifugation (at 1,000 x g for 5 min), washed twice in an equal volume of phosphate-buffered saline (PBS), and resuspended to 4 x 107 cells per ml. The cell suspension (50 µl) was applied to a microscope slide which had been coated previously with 0.1% poly-L-lysine solution (Sigma-Aldrich). Slides were placed in a humid chamber for 30 min to allow cells to adhere. The slides were washed in PBS, immersed in 4% paraformaldehyde in PBS for 10 min, and then quenched by addition of glycine to a final concentration of 0.1 M. Slides were washed three times in PBS for 5 min, drained, and incubated with 100 µl of a solution containing 0.2 µg of 4',6'-diamidino-2-phenylindole (DAPI) per ml of PBS for 3 min. Finally, slides were rinsed with PBS, drained, and mounted in Vectashield (Vector Laboratories, Inc., Burlingame, Calif.). Cell images were captured on an Axioscope 2 microscope (Carl Zeiss, Jena, Germany), and images were processed with Adobe PhotoShop (version 6; Adobe Systems, Mountain View, Calif.).
Oligonucleotide mutagenesis. To create pMA1.1, plasmid pMA1 was digested with HindIII and XbaI, and a 2.75-kb HindIII-XbaI fragment containing the KAP3-GFP gene (see Fig. 1) was cloned into HindIII- and XbaI-digested pGEM11Z(+) (Promega) for mutagenesis. Mutation of the first conserved octameric sequence in the pMA1.1 plasmid was carried out by oligonucleotide mutagenesis using oligonucleotide E45 (5'-GCAATCGGCTTGTCATgaAAAACATACAAATAC-3' [the octamer sequence is underlined and nucleotide sub-stitutions within it are shown in lowercase]) and the Promega Gene Editor kit according to the manufacturer's instructions. Plasmid pMA1.1 was cut with HindIII and XbaI, and the 2.75-kb fragment released was then subcloned into the HindIII-XbaI sites of pGEM11Z (+) to generate the pMA1.2 plasmid. The pMA1.2 plasmid was used as a template in mutating the second octameric sequence with oligonucleotide F30 (5'-CAATGTGGAGTTCGTATTcaTATGTGATGGGCAACA-3') as described above. The base substitutions in pMA1.1 and pMA1.2 were confirmed by DNA sequence analysis. The pMA1.2 plasmid was digested with HindIII and XbaI, and the 2.75-kb fragment was used to replace the same HindIII-XbaI fragment of pMA1, creating pMA2.
![]() View larger version (30K): [in a new window] |
FIG. 1. Physical map of the KAP3-GFP expression plasmid pMA1. Full-length EGFP was fused in frame near the 3' end of the KAP3 coding sequence as a tag to distinguish the chimeric transcript from that of the KAP3 gene. The vector contains the HYG selectable marker flanked by the L. major 5' and 3' flanking regions of the DHFR-TS gene for expression of the HYG drug resistance marker. The 5' and 3' intergenic sequences flanking the C. fasciculata KAP3 gene are indicated. The locations of the KAP3 splice acceptor site and octameric sequences are also indicated. Mutated sequences are given in parentheses.
|
Plasmid pMA5.1 was constructed as follows: plasmid pMA5.4 was digested with EcoRV and XbaI, and the 0.54-kb fragment was replaced with the corresponding EcoRV-XbaI sequence from plasmid pMA1. All plasmid constructs were electroporated into wild-type C. fasciculata cells as described previously (17).
Isolation and analysis of RNA. Hydroxyurea synchronization of C. fasciculata cells and isolation of total RNA were performed as described previously (17). Total RNA (8 to 10 µg) was fractionated on 1.2% agarose-formaldehyde gels and transferred to nylon membranes (Hybond-XL; Amersham Biosciences, Piscataway, N.J.) by vacuum blotting in 20x SSC, pH 7.0 (1x SSC is 0.15 M NaCl plus 0.015 M sodium citrate). RNA was cross-linked to the membrane by UV irradiation by use of a Stratalinker (Stratagene) according to the manufacturer's instructions. The membrane was prehybridized at 42°C in a solution containing 50% formamide, 5% Denhardt's reagent (EM Science), 1% sodium dodecyl sulfate (SDS), 0.75 M NaCl, 50 mM NaH2PO4, 5 mM EDTA, 100 µg of sonicated salmon sperm DNA/ml, and 100 µg of yeast tRNA/ml for 3 h. A 405-bp DNA fragment encoding the full KAP3 coding sequence was PCR amplified with oligonucleotides A49 (5'-CAATGCTGCGCCGTAGC-3') and A100 (5'-CGGGAATTCCTACTTGCGCGCTGCCGTTGTC-3') and gel purified. The PCR product was labeled with the Random Primer Labeling beads (Amersham Bioscience, Piscataway, N.J.) and purified on a Sephadex G-50 column (Amersham Pharmacia Biotech). The membrane was hybridized at 42°C for 15 to 17 h and then washed twice with 2x SSC-0.1% SDS at 60°C and twice with 0.1x SSC-0.1% SDS at 60°C. To generate the HYG probe (a 1,026-bp DNA fragment carrying the HYG coding sequence), oligonucleotides K96 (5'-ATGAAAAAGCCTGAACTCAC-3') and K97 (5'-CTATTCCTTTGCCCTCGGAC-3') were used in a PCR with 20 ng of plasmid pX63HYG (4). The membrane was subsequently stripped and hybridized with the CaBP probe as a loading control. The CaBP probe was a partial cDNA of the putative C. fasciculata homolog of the T. cruzi 1F8 protein (17). Blots were quantitated by using a PhosphorImager and ImageQuant software (Molecular Dynamics).
Mapping of the KAP3-GFP splice acceptor site by PCR. The splice acceptor site of KAP3-GFP transcripts was determined by reverse transcription-PCR (RT-PCR). Total RNA was isolated from C. fasciculata cells expressing plasmid pMA1 by using RNeasy columns according to the manufacturer's directions (Qiagen). Total RNA (8 µg) was treated with 6 U of DNase I (Ambion) for 15 min at 37°C. DNase I was inactivated for 10 min at 65°C. cDNA was synthesized by using 0.3 µg of DNase I-treated total RNA with the GFP-specific primer G11 (5'-GAAGGCCGTCTTGGCGATATCCTTGTACAGCTCGTCCATG-3') and Superscript II reverse transcriptase (Gibco BRL). The cDNA was used in PCRs with the spliced leader oligonucleotide B88 (5'-CCGGTACCATGGATCCAACGC TATATAAGTATCAGTTTCTG-3') and the KAP3 gene-specific oligonucleotide B46 (5'-TCGTTTTGCAGCGTACCATTCTTGG-3'). Thirty cycles of PCR consisting of 1 min at 94°C, 1 min at 58°C, and 1 min at 72°C were performed with Taq polymerase (Invitrogen), followed by 10 min at 72°C. PCR products were cloned using a Topo TA cloning vector (Invitrogen), and several clones were sequenced by dideoxynucleotide chain termination with modified T7 DNA polymerase (Sequenase 2.0) according to the manufacturer's instructions (U.S. Biochemicals).
Mapping of the KAP3-GFP splice acceptor site by RNase protection. An RNase protection assay was performed by using an Ambion RPAIII kit according to the manufacturer's instructions. C. fasciculata DNA-free total RNA (15 mg) was isolated by using an RNeasy kit (Qiagen) and hybridized with an 819-bp 32P-labeled RNA probe (2.5 x 105 cpm; ca. 2 fmol) containing 55 nt of nonhybridizing sequence followed by 90 nt complementary to the KAP3 coding sequence and 674 nt 5' of the KAP3 start codon. RNA hybrids were digested with RNase A and RNase T1 and were electrophoresed on a 4% polyacrylamide gel containing 8 M urea. 32P end-labeled DNA ladders (Invitrogen) were used as approximate size markers. The gel was dried and exposed to X-ray film.
|
|
|---|
![]() View larger version (61K): [in a new window] |
FIG. 2. Expression and mitochondrial targeting of the KAP3-GFP fusion protein in C. fasciculata cells transformed with plasmid pMA1. (A) DAPI staining; (B) phase-contrast image with DAPI staining; (C) phase-contrast image with GFP fluorescence; (D) GFP fluorescence.
|
![]() View larger version (63K): [in a new window] |
FIG. 3. Expression of endogenous KAP3 and chimeric KAP3-GFP transcripts varies during the cell cycle. (A) Schematic structure (not to scale) of the KAP3-GFP gene and flanking sequences in pMA1. SA, the KAP3 splice acceptor site. Unlabeled open rectangles indicate the locations of the CATAGAAA octamer sequences. (B) Northern blot analysis of total RNA isolated from synchronized C. fasciculata cells carrying the pMA1 plasmid. Total RNA was isolated at the time of release from hydroxyurea arrest (0 min) and at 30-min intervals thereafter. Total RNA (8 µg per lane) was subjected to Northern blot analysis by hybridization to the KAP3 gene coding sequences to detect both chimeric KAP3-GFP transcripts and endogenous KAP3 transcripts. The same Northern blot was stripped and rehybridized to a 260-bp probe derived from a partial cDNA encoding the C. fasciculata homolog to the T. cruzi flagellar calcium binding protein (CaBP). (C) PhosphorImager quantitation of transcript levels in the Northern blot. Endogenous KAP3 (solid bars) and chimeric KAP3-GFP (dark shaded bars) RNA transcript levels have been normalized at each time point relative to the level of the CaBP transcript, which is expressed at a constant level during the cell cycle and serves as a loading control.
|
![]() View larger version (32K): [in a new window] |
FIG. 4. Sequence elements required for cycling of KAP3-GFP mRNA levels. Shown is a PhosphorImager quantitation of Northern blots of total RNA isolated from synchronized C. fasciculata cells carrying either pMA2 (A), pMA5.4 (B), or pMA5.1 (C). RNA samples were isolated at 30-min intervals after release from hydroxyurea arrest and analyzed as for Fig. 3. A schematic diagram of the relevant region of each plasmid, with open rectangles representing wild-type consensus octamer sequence elements (CATAGAAA) and filled rectangles representing mutated octamer sequences, is shown above the respective bar graph. Solid bars, KAP3 mRNA; dark shaded bars, KAP3-GFP mRNA.
|
Since all previous octamer sequences required for cycling of an mRNA were found on the mature mRNA, the finding of an octamer sequence required for mRNA cycling that is present only on the pre-mRNA has important implications for the cycling mechanism. Because of the importance of this result, we questioned whether there might be an undiscovered splice acceptor site 5' of the octamer sequence located distal to the single identified splice acceptor. The known splice acceptor site was identified in several independent cDNA clones earlier by RT-PCR (26). Similar experiments have shown that the KAP3-GFP chimeric RNA is also spliced at this site in several independent isolates (data not shown). To confirm the existence of only a single splice acceptor site, we have also performed RNase protection assays using an 819-nt labeled probe containing 90 nt of KAP3 coding sequence and extending into the intergenic region to within 22 nt of the polyadenylation site of the upstream KAP2 gene (Fig. 5). Splicing at the known splice acceptor site, at position -138 relative to the start codon, should yield a protected fragment of 228 nt. The strong band in Fig. 5, lane 1, is consistent with splicing at the single known splice acceptor site. No larger protected fragments are observed, in agreement with our earlier finding of only a single splice acceptor site by RT-PCR.
![]() View larger version (34K): [in a new window] |
FIG. 5. RNase protection mapping of the KAP3 splice acceptor site. C. fasciculata total-cell RNA (15 µg) was hybridized to a 32P-labeled RNA probe and digested with RNase A and RNase T1. The protected hybridized probe fragment was resolved on a 4% polyacrylamide gel containing 8 M urea. Lane 1, RNase A- and RNase T1-digested RNA; lanes 2 and 3, 32P-labeled 1-kb Plus and 1-kb DNA markers (Invitrogen); lane 4, RNA probe. The probe and protected fragment are diagramed underneath the autoradiogram.
|
![]() View larger version (45K): [in a new window] |
FIG. 6. Accumulation of pre-mRNA species of the KAP3-GFP chimeric transcript during progression through the cell cycle in C. fasciculata cells carrying pMA5.1. (A) The number of cells (squares) and the percentage of cells with two nuclei (triangles) were measured every 30 min following release from the hydroxyurea block to examine synchrony and cell cycle position. (B) Northern blot analysis of total RNA isolated at 30-min intervals. The blot was probed with KAP3 coding sequences and then stripped and hybridized with the CaBP probe. (C) PhosphorImager quantitation of relative levels of chimeric KAP3-GFP and endogenous KAP3 transcripts. Transcript levels have been normalized at each time point relative to the level of the CaBP transcript, which is expressed at a constant level throughout the cell cycle.
|
![]() View larger version (44K): [in a new window] |
FIG. 7. Northern blot analysis of total RNA isolated at 30-min intervals from hydroxyurea-synchronized C. fasciculata cells carrying pMA5.1. (Right) The Northern blot was hybridized with HYG coding sequences. (Left) The same Northern blot was stripped and reprobed with KAP3 coding sequences as for Fig. 6. The endogenous KAP3, chimeric KAP3-GFP, and HYG mRNA bands are indicated on the sides of the autoradiogram. Arrowheads indicate incompletely processed transcripts.
|
|
|
|---|
The KAP3 mRNA cycles in parallel with the TOP2 and RPA1 mRNAs and contains two copies of the consensus octamer sequence within the KAP3 3' UTR. The unexpected finding that mutation of both octamer sequences in a KAP3-GFP mRNA did not have a significant effect on cycling of the KAP3-GFP mRNA led us to examine the possible contribution of a consensus octamer sequence present 5' of the only identified KAP3 splice acceptor site. Mutation of this octamer sequence in addition to the two contained in the 3' UTR completely abolished cycling of the mRNA.
The requirement for a pre-mRNA sequence, not present on the mature mRNA, for cycling of the mRNA would imply an involvement of that sequence prior to or in the process of the maturation of the mRNA, since the 5' cleavage of the precursor RNA and addition of the spliced leader sequence result in the loss of sequences 5' of the splice acceptor site. The detection of pre-mRNA transcripts of the KAP3-GFP gene only at times in the cell cycle when the KAP3-GFP mRNA levels are lowest suggests that the octamer sequence elements may mediate a cell cycle-dependent inhibition of transcript processing leading to degradation of the transcript. The presence of downstream gene sequences on higher-molecular-weight KAP3-GFP transcripts when cells are dividing indicates a failure to trans-splice and polyadenylate within the intergenic space between these genes at this time in the cell cycle. Interference with transcript processing may contribute to transcript degradation and thus account for the decline in mRNA levels during this time. A requirement for multiple copies of a short sequence for modulating RNA splicing and mRNA levels has been observed in other systems. In higher eukaryotes, cis-splicing has been observed to be affected by adjacent intron sequences (1, 6, 7), and a repeated hexamer motif in an intron in the rat fibronectin gene has been shown to be important for splice site recognition (10). The role of repeated sequences in RNA splicing has also been documented in the regulation of Drosophila doublesex pre-mRNA splicing (22, 23). Products of the tra and tra-2 genes positively regulate female-specific dsx splice acceptor usage.
The molecular mechanism by which the C. fasciculata octamer consensus sequences mediate the cell cycle regulation of mRNAs containing these sequences remains to be revealed. Since a single octamer sequence would have little informational capacity to recruit trans-acting factors, it is not surprising that multiple copies of the octamer in the transcript might be necessary to increase cycling. Identification of trans-acting factors will be essential for revealing the mechanism regulating mRNA cycling. A protein complex (CSBP) that binds with high sequence specificity to the consensus octamer sequence has been described previously (11-13). This complex contains subunits encoded by the CSBPA and CSBPB genes. The CSBP complex and a second complex (CSBP II) with similar binding specificity (unpublished data) are currently being investigated regarding their possible involvement in the cycling of mRNAs containing octamer sequence elements.
for constructing plasmid pJL1 and for helpful discussions. This work was supported by National Institutes of Health grant GM53254.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»